F&O Pulse — Top 25 Bullish & Bearish (Live)

Show CPR Lines Show Prev Day High/Low

Entry Filters

Require Day Open Inside CPR Range

CPR Open Range Buffer (%) As a decimal, e.g. 0.0015 = 0.15% — widens the CPR band the open must fall inside.

Retest Touch Buffer (%) As a decimal, e.g. 0.0025 = 0.25% — how close price must retest back to the previous day's High/Low to arm the final breakout confirmation.

Entry confirmation

Swing high Break [ON / OFF]

No retest needed. After a PDH break the first swing high forms, then a higher low (HL). The Buy fires when a candle closes above that first swing high. Sell: after a PDL break, the first swing low, then a lower high (LH); fires when a candle closes below that first swing low. If a candle closes below the HL (above the LH) first, that HL/LH is dropped and a new one is awaited; a close back past PDH/PDL resets the setup.

Pivot length (candles each side that confirm the HL / LH)

Pullback break [ON / OFF]

Needs a retest of PDH/PDL first (see the retest buffer above): fires when a candle closes beyond the high of the retest candle (Sell: its low). Both on: whichever fires first wins. Both OFF: no break confirmation, the signal fires on the retest candle's close.

Skip PDL to PDH sweeps [ON / OFF]

Buy: no signal if price already touched PDL earlier today before the PDH break. Sell: no signal if price already touched PDH before the PDL break.

Filter Out Large Candles (Disable if missing trades)

Max Candle Body (x ATR) Rejects a signal whose triggering candle's body exceeds this many multiples of ATR(14).

Detect Strong Buy/Sell (swing confirmation) Not tied to PDH/PDL — checks the swing structure leading into the signal candle. A higher low between two similar swing highs (Buy) or a lower high between two similar swing lows (Sell) upgrades the label to Strong.

Bot

Bot trades only chart-confirmed signals [ON / OFF]

ON: the bot trades only the Buy/Sell signals this chart actually draws (the open browser reports them to the bot, so keep the app open during market hours). Signals only the server scan found, and Engine preset signals, are not traded. OFF: the server scan feeds the bot directly, as before.

Timing Filter

Timing Filter [ON / OFF]

Start Time (IST)

End Time (IST)

Crossed Previous Day High (PDH) Crossed Previous Day Low (PDL) ON: a Buy/Sell only fires if price crossed PDH (Buy) / PDL (Sell) on a 5-min candle that opened inside the window (start inclusive, end exclusive, so the candle has closed by the end time). Crossings outside the window are ignored. OFF: no timing restriction.

CPR Range Filter

CPR range filter [ON / OFF]

Allow signals only when the day's CPR width is

Select at least one range, or turn the filter off. With none selected the filter is ignored. Width = |TC − BC| as % of the day's opening price (fixed for the day, so signals never appear or vanish as price moves; the card badge uses the latest close, so a day right on a boundary can differ). Applies to first signals, re-entries, the background scanner and signals sent to the Bot Room.

Stock Card Badge

Show CPR Range Type on Card [ON / OFF] Width = |TC − BC| as % of close. Very Tight <0.15% · Tight 0.15–0.35% · Normal 0.35–0.70% · Wide 0.70–1.20% · More Wide >1.20%.

Re-entry

Re-entry signal on 1st high break [ON / OFF]

Allow re-entry after

Max re-entries per day

Show RE-BUY / RE-SELL label on re-entry candles [ON / OFF] After the trade ends, a new Buy fires when a candle closes back above the 1st signal's high (Sell: below its low). Stop, target and trailing stop restart fresh from the re-entry candle. "Trailing SL" exits only happen when Risk : Reward trailing is on below.

CQS

CQS filter [ON / OFF]

CQS range: Min to Max

A signal only fires if the option contract it would trade (Buy: CE, Sell: PE) has a CQS inside this range at that moment. Otherwise no signal is drawn or sent to the bot.

Show CQS on signal label [ON / OFF] Shows the CQS the contract had when the signal fired: below the Buy label, above the Sell label. It stays fixed afterwards.

ADX

ADX filter [ON / OFF]

ADX period

Min ADX

Max ADX (100 = no limit)

ADX rising (higher than the previous candle) Direction agrees (Buy: +DI above −DI · Sell: −DI above +DI) A signal only fires on a candle where ADX is between Min ADX and Max ADX (Max 100 = no upper limit); otherwise no signal is drawn or sent to the bot. If the breakout candle fails, a later candle that breaks the same level with ADX in range can still fire. Applies to re-entries too.

Show ADX on signal label [ON / OFF]

Chart position

Latest candle at

The empty space to the right of the latest candle is where the long / short trade box is drawn. Every candle in view stays visible; they just get narrower as the space grows. Applies to charts with CPR Signals on and to the CPR Signals page.

No Entry In Sudden Spike Candles

No entry in sudden spike candles [ON / OFF]

Custom multiple × the average range

Average of the last candles of the same day

A candle is a spike when its range (high minus low) is at least the chosen multiple of the average range of the previous candles that day. A signal that would fire on a spike candle is skipped for good: no chart marker, not added to the watchlist and not sent to the bot. A new PDH / PDL cross is needed to arm the setup again.

Minimum Reward Filter

Fire signals only if reward is at least [ON / OFF]

Minimum reward (%) of the signal price

Reward = stoploss distance × reward ratio, taken from the Risk : Reward settings below (works even with the position box off). A signal under the minimum is not drawn, not added to the watchlist and not sent to the bot.

Market Trend Filter

Only fire signals that match the market trend [ON / OFF]

Neutral when the lead is under % of crossed stocks

Market bullish (clearly more F&O stocks above their previous day high than below their previous day low): only Buy signals fire. Market bearish: only Sell signals fire. Market neutral: both. The count is scanned every 10 minutes and each signal is judged against the latest count at the time it fired. Only today's signals are filtered.

Top Movers Scan

Top movers only [ON / OFF]

Top gainers and top losers stocks each

Keep stocks with a setup in progress, even if they drop off the list The background scan checks only today's biggest gainers and losers (ranked by % change from the open, same as the Movers page) instead of every F&O stock. Stocks that crossed PDH / PDL and are waiting for the retest or break stay in the scan when the box above is ticked. This changes which stocks the server scan and the CPR Signals tab look at, not the chart marker or the other filters.

Type 1 · Risk : Reward

Show long / short position box on CPR signals

Stoploss (Sell uses the high, Buy uses the low)

Manual stoploss distance (%) Risk as a % of the signal price, used when Manual is selected.

If the chosen level is not beyond the signal price (above it for a Sell, below for a Buy), the next valid level is used automatically. Exit stoploss on candle close only [ON / OFF] OFF (default): the stoploss exits as soon as price touches it. ON: wick sweeps through the stoploss are ignored; the trade exits only if a candle closes beyond it, at the close price.

Reward ratio (1 : X)

Custom ratio

Target / stop zone opacity

Trailing stoploss

Trail the stoploss in my favour (never moves back)

Start trailing

Exit trailing SL on candle close only Ignores wick sweeps through the trailing stop. Exits only if a candle closes beyond it, at the close price. The initial stoploss has its own switch above.

Trailing SL colour

Use the same colour for re-entry trailing SL

Re-entry trailing SL colour

Type 2 · Trailing SL

Type 2 Trailing SL [ON / OFF]

Start trailing

Exit on candle close only [ON / OFF]

Type 2 colour

Type 2 works with the Type 1 position box switched OFF: only the trailing line is drawn (no box, no initial stoploss line) and the bot moves the stop by it. The first stop uses the Stoploss and Reward ratio settings from Type 1, even while they are hidden. It is not used while Type 1 trailing (box ON and its Trail toggle ON) is in use.

F&O Top 25 — Bullish CE Charts

📐 CPR Signals

Sector Flow — Live Sector Heatmap

🚀 Option R3 Watchlist